Procedure
1. Raise the front of the vehicle and support it on jack stands.
2. Disconnect the return hose from the tank.
3. Connect the additional hose to the return hose and drain the liquid into a suitable container.
4. Disconnect the high-voltage wire from the ignition coil. Periodically engage the starter and at the same time turn the steering wheel from lock to lock several times to drain all the fluid from the hydraulic power steering drive.
5. Connect the return hose to the tank and secure it with a clamp.
6. Fill the tank with the recommended liquid. Power steering fluid type: PSF–3. Fluid capacity: 0.75–0.8 l.
7. Start the engine. Check for fluid leaks from the hose and stop the engine.
8. Pour the fluid into the tank up to the base of the oil filter.
9. Bleed the power steering hydraulic drive.