Car body/interior maintenance Body maintenance The condition of the car body has a big impact on its value. Maintenance is simple but should be done regularly. Neglecting to eliminate minor damage...
Body Damage Repair Repair of minor body damage If there is damage to the bodywork, remove nearby decorative trim parts, then tap the damaged area with a hammer. Now remove the paint from...
Side molding — removal and installation The side protective molding is fixed with clips, to release which use a wide spatula or screwdriver. Molding can be additionally glued. Separate the adhesive connection...
Rope — removal and installation Withdrawal Open the hood and place a clean rag under the corners of the hood. If there is a light in the engine compartment, disconnect the electrical connector from the...
Front fender — removal and installation Withdrawal Remove the front bumper, headlights, side fairing. Unscrew the self-tapping bolts and remove the splash guard (1). Remove side turn signal (2). Unscrew the...
Doors — adjustment Doors - position adjustment If the gap between the door and the body is uneven, stick the protective tape on the contact surface of the door and the surface around the...
Doors — removal and installation Withdrawal Typical door elements 1 - door limit switch; 2 - cover; 3 - latch; 4 - lower loop; 5 - top loop; 6 - door; 7 - pin; 8 - wire connector. Open the door and...
Rear view mirror (side) — removal to installation Rear view mirror elements 1 - connector; 2 - mirror; 3 - body; 4 - gasket; 5 - outer cover; 6 - frame; 7 - cover; And - a mirror with manual control; B - electric...
Front seats — removal and installation Seat fittings Front seat elements Withdrawal Remove the rear floor console assembly. Using a screwdriver blade as a lever, remove the heated seat switch (1) (vehicles...