Car rear suspension repair Hyundai Elantra 1

Rear suspension device
The car is equipped with a multi-link rear suspension. The rear shock absorber is hydraulic, double-acting. The rear wheel hub is equipped with a double-row radial...

Shock absorber strut of early car models — removal, installation and repair
Shock absorber strut elements of early car models 1 - fastening nut; 2 - washer; 3 - upper bushing; 4 - thrust bearing; 5 - spring lining; 6 - upper bushing; 7 -...

Shock absorber strut of late models of the car — removal, installation and repair
Shock absorber strut elements of late model cars 1 - body; 2 - spring cup; 3 - spring; 4 - buffer; 5 - case; 6 - upper support of the rack; 7 - bushing; 8 - nut; 9 -...

Rear wheel hub brake drum — removal and installation (models of cars with two bearings)
Removal Carefully remove the hub cap (4) using a plastic or rubber mallet or screwdriver. Pull the handbrake and loosen the self-locking nut (5) slightly, without...

Rear wheel hub bearings — removal, installation, inspection (car models with two bearings)
Removal the outer bearing races Remove the brake drum or wheel hub. Remove the seal (1). By placing a brass rod in a circle at different places on the bearing race,...

Rear wheel hub of single bearing car models
Rear wheel hub of a late model car A - disc brake; B - drum brake; 1 - fist; 2 - brake shield; 3 - hub; 4 - brake disc; 5 - washer; 6 - nut; 7 - cap; 8 - brake mechanism...

Control Arm Bushings — Replacement
Press out and press in the lever bushings using special tools. Note: If the special bracket is difficult to insert, tap it lightly with a plastic hammer. Caution: Do not...

Anti-roll bar — removal and installation (late models)
Anti-roll bar mounting elements 1 - stabilizer link; 2 - anti-roll bar; 3 - rubber bushings; 4 - clamps. Removal Loosen the nuts (1) and remove the anti-roll bar strut...

Rear Wheel Alignment — Checking and Adjusting
Place the vehicle on a level, horizontal surface. Before measuring, the elements and parts of the rear suspension and wheels must be in normal technical condition....

Rear suspension arms — repair
Perform rear suspension arm repair operations using the illustrations below. Trailing arm mounting elements Mounting elements of cross rods (2) and beams (3) Correct...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Chassis: Rear suspension Hyundai Accent 3 (2005-2010)
Chassis: Rear suspension Hyundai Sonata 3 (1993-1998)

Add to social network:

Link in different formats to this section

TextHTMLBB Code

Elantra 3 (2000-2006)