Repair of drive shafts of cars Hyundai Elantra 1

General description of drive shafts
To drive the front drive wheels in the models under consideration, drives of various types are used. Each drive consists of three parts: an inner part consisting of a...

Checking protective covers
Raise the front of the vehicle. With the vehicle raised, the drive shaft joint boots can be easily checked. Press the protruding parts of the cover (arrow) to the side...

Drive shaft — removal and installation
Removal Remove the brake hose clamp, the wheel speed sensor (A) wire connector (cars with ABS) and anti-roll bar. Using the hub release guard, unscrew the wheel drive...

Roller Joint Drive Shafts — Repair
Drive shaft elements (models produced before 2002) 1 - CV joint (BJ); 2 - clamp; 3 - damper (not all models); 4 - clamp; 5 - case; 6 - inner CV joint race (TJ); 7 -...

Drive shaft with ball joint — repair
Disassembly Remove the clamps securing the protective cover. Remove the protective cover from the inner hinge housing. Remove the inner joint housing from the drive...

Troubleshooting Drive Shafts
Usually there are no special problems with drive shafts. Their service life depends, naturally, on driving style. Abrupt starts with full throttle and stubborn front...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Transmission: Drive shafts Hyundai Accent 1 (1994-1999)
Transmission: Drive shafts and axles Hyundai Getz (2002-2011)
Transmission: Drive shafts Hyundai Sonata 4 (2001-2012, petrol)
Transmission: Drive shafts Hyundai Tucson 2 (2009-2015)

Add to social network:

Link in different formats to this section

TextHTMLBB Code

Elantra 3 (2000-2006)