Car clutch Hyundai Elantra 2

Clutch — technical characteristics
Clutch drive - Hydraulic Clutch disc - Single, dry, with diaphragm spring Friction surface diameter, mm — 215 x 145 (external and internal) Diaphragm spring Push action...

Clutch — Standard Parameters
Clutch disc thickness (in a free state) — 8.7±0.3 Clutch pedal height - 190.1 Clutch pedal free travel - 6 - 13 Gap between clutch pedal and floor (with the pedal...

Clutch — tightening torque, Nm
Clutch Pedal to Pedal Hanger Bracket - 19-28 Pedal Hanger Bracket - 17-21 Clutch master cylinder to engine compartment bulkhead — 8 - 12 Hydraulic line nipple — 13 - 17...

Clutch — Lubricants and Working Fluids
Lubricants and working fluids Object Lubricants Quantity Contact surface of thrust bearing and thrust fork support MOLIWHITE TA #2 As required Inner surface of the...

Clutch — malfunctions
Sign Probable cause Method of elimination The clutch is slipping. The speed of the car does not increase as the engine speed increases. Insufficient vehicle speed. Loss...

Clutch pedal adjustments
1. Measure the height of the clutch pedal (from the top surface of the pedal pad to the floor of the passenger compartment) and free play of the pedal around the roller...

Bleeding the hydraulic drive
In each case, after removing the hydraulic lines or the clutch master cylinder, or if the clutch pedal fails, bleed the clutch hydraulic system. Warning. Use the fluid...

Clutch pedal
Tightening torque, Nm Removal 1. Remove the cotter pin, washer and stud. 2. Remove the clutch pedal mounting bolt. Examination 1. Check the clutch pedal shaft and...

Clutch drive
Tightening torque, Nm Removal 1. Drain the liquid through the drain hole by unscrewing the plug. 2. Remove the pin, washer and cotter pin. 3. Disconnect the hydraulic...

Clutch master cylinder
Tightening torque, Nm Disassembly 1. Remove the piston retaining ring. 2. Pull out the rod with the piston assembly. 3. Remove the clamp from the tank, the tank lid and...

Clutch slave cylinder
Tightening torque: Nm Removal 1. Disconnect the turbocharger tube. 2. Remove the slave cylinder mounting bolt. Examination 1. Check for fluid leaks from the working...

Clutch housing and disc
Tightening torque: Nm 1. To remove the gearbox assembly, first disconnect the air filter, mounting bracket, electrical wiring, etc. 2. Remove the push lever. a) Loosen...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Transmission: Clutch Hyundai Accent 1 (1994-1999)
Transmission: Clutch Hyundai Getz (2002-2011)
Transmission: Clutch Hyundai Sonata 3 (1993-1998)
Transmission: Clutch Hyundai Tucson 1 (2005-2010)
Transmission: Clutch Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code

Elantra 3 (2000-2006)