General description of the ignition system The ignition system provides reliable ignition of the working mixture in the engine cylinders in accordance with the order of operation of the cylinders. The working...
Safety measures when working with the ignition system To avoid injury to people or failure of the electronic ignition system, the following precautions must be observed: Do not touch or remove the ignition wires while the...
Ignition coil Early model years In these vehicles, the ignition coil is mounted in the distributor. Place of installation of the ignition coil in the distributor The resistance of the...
Ignition timing — check The ignition timing is usually not lost, but it should be checked. Setting the ignition timing should be carried out after loosening the fastening of the ignition...
Ignition distributor — removal and installation Early model years The distributor of ignition is set in motion from a camshaft. The ignition distributor is mounted on the cylinder head in front. Withdrawal Disconnect...
Spark plug The spark plugs ignite the mixture in the cylinder when the piston reaches top dead center (end of compression stroke). Controlled combustion, in which the piston goes...
Spark plug wires — control and replacement When adjusting, it is necessary to carefully inspect their insulation for burns, cracks or kinks. Check the wire caps on the spark plugs, ignition coil and distributor...