Technical data of the lubrication system The lubrication system consists of an oil pan, an oil pump, an oil filter and various channels. The oil pump is driven by the crankshaft. The bypass valve in the oil...
Checking the engine oil level Order of execution 1. Install the car on a flat horizontal platform. 2. Warm up the engine to normal operating temperature and turn it off. Attention! If the car has not...
Engine oil change Warning! Be careful when changing engine oil as the oil is hot and can cause burns. Order of execution 1. Warm up the engine to normal operating temperature and turn it...
Oil filter replacement All Hyundai engines are equipped with a high quality, disposable oil filter. This filter is recommended as a replacement filter on all vehicles. Only high quality...
Engine oil selection The choice of engine oil for gasoline engines It is recommended to use engine oils of SG or SG/CD viscosity grades shown in the figures. Attention! For optimal...
Oil pump for gasoline engines Withdrawal 1. Remove the toothed belt. 2. Turn out all bolts of fastening of the oil pallet. 3. Remove the oil pan. 4. Turn out 2 bolts and remove the mesh oil filter...
Diesel engine oil pump Withdrawal Remove the inner and outer gears of the oil pump from the front cover, after noting their relative position. Examination 1. Check for wear or damage to the...
Oil cooler for diesel engines The diesel engine oil cooler is located at the base of the oil filter and transfers heat from the heated engine oil to the coolant. Withdrawal 1. Remove the oil filter....