Lubrication System Specifications Lubrication system of 1.1 l engines Name Meanings Oil pump Clearance between the outer gear and the socket in the pump body, mm 0,10–0,18 Gap between ends of gears and...
Features of the lubrication system The lubrication system is combined: splash and under pressure. Under pressure, the main and connecting rod bearings, camshaft supports are lubricated. The system...
Selecting Motor Oil for Gasoline Engines For Hyundai Getz, it is recommended to use engine oils of the SH or SG viscosity classes shown in the figure. Note: For optimum lubrication and maximum engine...
Checking the engine oil level 1. Place the vehicle on a level, horizontal surface. 2. Warm up the engine to normal operating temperature and turn it off. Note: If the vehicle has not been used for a...
Engine oil change Caution: When changing engine oil, be careful because the oil is hot and can cause burns. 1. Warm up the engine to normal operating temperature and turn it off. 2. Stop...
Replacing the oil filter All Hyundai engines are equipped with a high-quality, disposable oil filter. This filter is recommended as a replacement filter on all vehicles. Only high-quality...
Oil pressure sensor If the engine oil pressure warning light comes on after the ignition is turned on and goes out after the engine starts, the engine oil pressure sensor is OK. If the...