Vehicle power equipment Hyundai Getz

Troubleshooting the charging system
Malfunction Probable causes Method of elimination The charging indicator lamp does not light after the ignition is turned on The fuse has blown Replace the fuse The...

Troubleshooting the Engine Starting System
Malfunction Probable causes Method of elimination The engine crankshaft does not turn over with the starter Battery is discharged Charge or replace the battery Poor...

Description of the charging system operation
The charging system includes a battery, a generator with a built-in regulator and a charge control lamp, and wires. The car has an alternating current generator with a...

Checking the voltage drop on the wire connecting the battery to the generator
This voltage drop test on the wire allows you to determine the reliability of the connection between the generator terminal "B" and the positive (+) terminal of the...

Checking the current generated by the generator
This test determines whether the generator produces a current that is equivalent to its rated power. Preparing for the test 1. Before testing, check the following items:...

Checking the regulated voltage
The purpose of this test is to verify that the electronic voltage regulator maintains the generated voltage at the required level. Preparing for the test 1. Before...

Generator — removal, disassembly and installation
Generator: 1 - nut; 2 - pulley; 3 - spacer sleeve; 4 - front cover; 5 - front bearing; 6 - bearing mounting washer; 7, 11 - screws; 8 - rotor; 9 - lid; 10 - mounting...

Battery — Checking, Charging and Precautions
A battery is a device for storing energy in chemical form, which can then be used as electricity. The battery works because two different metals, when placed in an...

Engine starting system
The engine starting system includes the battery, starter, traction relay, ignition switch, interlock switch (only on vehicles with automatic transmission) and wires....

Ignition system — removal, installation and testing
The ignition system produces a spark in each cylinder at a certain point in time. It ignites the supplied fuel-air mixture. To do this, the ignition coil converts the 12...

Stator Elements — Checking and Adjusting
Adjusting the clearance between the end of the gear and the stop 1. Disconnect the starter motor excitation winding wire from the "M" terminal of the traction relay. 2....

Starter — checking, removal and installation
Starter: 1 - front cover; 2 - limiting ring; 3 - anchor; 4 - drive gear; 5 - traction relay mounting screw; 6 - electromagnetic traction relay; 7 - contact bolt; 8 -...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Electrical equipment: Power devices Hyundai Accent 2 (1999-2005)
Electrical equipment: Power devices Hyundai Elantra 3 (2000-2006)
Electrical equipment: Power devices Hyundai Santa Fe 2 (2007-2012, petrol)
Electrical equipment: Power devices Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code