Removal and installation of a manual transmission Disconnect the wires from the battery and remove the battery. Remove the battery tray by unscrewing the five bolts securing it. Bolts of fastening of an arm of the shelf...
Replacing the differential seal Disconnect the wheel drive shaft from the gearbox, as indicated in subsection « Front-wheel drive ». differential seal Remove the oil seal with a flat blade screwdriver....
Gearshift drive Cable shift gear The shift cable drive is shown in the figure. Withdrawal Gear lever with handle removed Remove the shift lever handle. Removing the center console...
Gear shift lever Gear Lever: 1 – the handle of the gear lever; 2 – a core of the lever of a gear change; 3 - finger; 4 - cover; 5 - pillow; 6 - body; 7 – a cable of a gear change; 8 – a...
Replacing the oil seal ring of the drive shaft 1. Disconnect the drive shaft from the gearbox. 2. Use a flat screwdriver blade to remove the O-ring from the gearbox socket. Attention! Clean the O-ring seat and apply...
Troubleshooting a Manual Transmission Feature Probable Cause Elimination method Vibration, noise Damage to the mounting of the gearbox and engine mounts Tighten fasteners Increased axial play of the shaft...