Drive shafts and vehicle axles Hyundai Getz

Drive shaft and axle specifications
Right (top) and left wheel drives: 1 - internal hinge; 2 - shaft; 3 - dynamic damper; 4 - outer hinge. Technical data Name/Engine 1.1 l 1.3, 1.5, 1.6 l Outer joint of...

Drive shaft — removal and inspection
Removal 1. Raise the vehicle, secure it on supports and remove the front wheel. 2. Remove the cotter pin, unscrew the castle nut and remove the washer securing the drive...

Drive shaft with TJ and BJ type CV joints.
Disassembly Note. Do not disassemble BJ type CV joint. To lubricate CV joints, use only special grease. When assembling the CV joint, it is necessary to install new...

Front Wheel Drive Specifications
Tightening torques for threaded connections, Nm Wheel mounting nuts 90–100 Front wheel hub nut 200–260 Nut of the bolt securing the suspension strut to the steering...

Description of the design of front wheel drives
Front wheel drive: 1 – retaining ring; 2 – wheel drive shaft; 3 – retaining ring; 4 – hub bearing; 5 – steering knuckle; 6 – protective cover; 7 – brake disc; 8 – nut...

Removal and installation front wheel drives
Removal Raise the car, remove the front wheel. Front wheel hub drive mounting nut Knock out the cotter pin and unscrew the front wheel hub mounting nut. Pressing out the...

Disassembly and assembly of front wheel drives
Front wheel drive: 1 – retaining ring; 2 – inner hinge housing; 3 – retaining ring; 4 – inner joint cage with rollers; 5 – protective cover of the inner hinge; 6 – outer...

Front wheel drive faults
Cause of malfunction Method of elimination Car pulls to the side Seizure of the ball joint of the shaft wheel drive Replace the hinge Wear, runout or seizure hub bearing...

Front wheel steering knuckle and hub
Removal 1. Raise your Hyundai Getz and remove the front wheel. 2. Remove the cotter pin and unscrew the drive shaft mounting nut. 3. Remove the caliper and secure it to...

Rear axle/rear wheel hub
Removal 1. Remove the brake drum. Note: Remove the brake drum after unscrewing the screw. Note: When removing the ABS sensor, be careful not to hit the sensor tip...

Rear wheel axle and hub faults
Sign Probable cause Method of elimination The car pulls to one side Production of the ball joint of the drive shaft Replace the drive shaft Wheel bearing wear, grinding...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Transmission: Drive shafts Hyundai Accent 1 (1994-1999)
Transmission: Drive shafts and axles Hyundai Elantra 2 (1995-2000, petrol)
Transmission: Drive shafts Hyundai Sonata 4 (2001-2012, petrol)
Transmission: Drive shafts and cardan Hyundai Tucson 1 (2005-2010)

Add to social network:

Link in different formats to this section

TextHTMLBB Code