Interior (internal elements) of the car Hyundai Getz
Center console — removal and installation
1. Remove the two screws securing the center console. 2. Set the parking brake lever to its highest position and remove the center console, first lifting its rear...
1. Remove the two screws securing the center console. 2. Set the parking brake lever to its highest position and remove the center console, first lifting its rear...
Instrument panel — removal and installation
Removal and installation the instrument cluster Attention! To prevent damage to parts, wrap the screwdriver blade in a cloth. To avoid injuring your hands, wear gloves....
Removal and installation the instrument cluster Attention! To prevent damage to parts, wrap the screwdriver blade in a cloth. To avoid injuring your hands, wear gloves....
Interior trim — removal and installation
Front pillar trim Note: Before removing the upholstery, first remove the outer seals. Upper trim of the middle pillar 1. Remove the front door sill trim. 2. Remove the...
Front pillar trim Note: Before removing the upholstery, first remove the outer seals. Upper trim of the middle pillar 1. Remove the front door sill trim. 2. Remove the...
Upper console — removal and installation
1. Remove the interior light diffuser. 2. Loosen the two console mounting bolts, disconnect the connector and remove the upper console. 3. Installation is carried out in...
1. Remove the interior light diffuser. 2. Loosen the two console mounting bolts, disconnect the connector and remove the upper console. 3. Installation is carried out in...
Upper handrails — removal and installation
1. Remove the screws and remove the handrail. 2. Installation is carried out in the reverse order of removal.
1. Remove the screws and remove the handrail. 2. Installation is carried out in the reverse order of removal.
Front seat — removal and installation
1. Remove the four front seat mounting bolts. 3. Installation is carried out in the reverse order of removal.
1. Remove the four front seat mounting bolts. 3. Installation is carried out in the reverse order of removal.
Rear seat — removal and installation
1. Remove the rear seat mounting bolts. Tightening torque: 35–55 Nm 2. Fold the rear seat down and remove it from the vehicle. 3. Installation is carried out in the...
1. Remove the rear seat mounting bolts. Tightening torque: 35–55 Nm 2. Fold the rear seat down and remove it from the vehicle. 3. Installation is carried out in the...
Seat belts — removal and installation
Seat belts with mechanical pretensioners 1. After the pretensioner has been activated, replace the seat belt with a new one. 2. When removing the seat belt, do not hold...
Seat belts with mechanical pretensioners 1. After the pretensioner has been activated, replace the seat belt with a new one. 2. When removing the seat belt, do not hold...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
We recommend other sections on the topic of Hyundai manuals:
Body: Interior (internal elements) Hyundai Accent 2 (1999-2005)
Body: Interior (internal elements) Hyundai Elantra 3 (2000-2006)
Body: Interior Hyundai Sonata 4 (2001-2012, petrol)
Body: Interior (internal elements) Hyundai Tucson 2 (2009-2015)
Link in different formats to this section
TextHTMLBB Code
- User manual
- Control devices
- Heating and ventilation
- Audio system
- Car driving
- Faults en route
- Maintenance
- Technical information
- Power unit
- Engine repair 1.1/1.3 l
- Engine repair 1.5/1.6 l
- Lubrication system
- Cooling system
- Fuel system
- Exhaust system
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts and axles
- Chassis
- Suspension and wheels
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Air conditioning and heater
- Electrical equipment
- Equipment and devices
- Power devices
- Electrical circuits