Interior (internal elements) of the car Hyundai Elantra 3
Console — removal and installation Removal and installation 1. After removing the knob from the shift lever, use a flathead screwdriver to remove the console top cover. 2. Remove the screws and remove the...
Instrument panel — removal and installation Withdrawal 1. Disconnect a wire from the negative plug of the storage battery. 2. Disconnect the connectors from the front seats, then remove the front seats. Warning!...
Ceiling trim — removal and installation Withdrawal 1. Remove the top console, sun visor, dome light and handle. 2. Remove the upper upholstery of the front, middle and rear pillars. 3. Remove the holders and...
Interior upholstery Withdrawal Upholstery of the front pillar Remove the front upholstery with a screwdriver. Front door sill trim 1. Turn out screws of fastening of an overlay of a...
Front seats — removal and installation Withdrawal 1. Remove the front seat. Tightening torque: 35–45 Nm. 2. Remove the seat cushion height adjustment knobs and support arm from the seat. 3. Remove the side...
Rear seat — removal and installation Withdrawal 1. Turn out bolts and remove a pillow of back sitting. Tightening torque: 17–26 Nm. 2. Turn out a bolt and remove a lateral back of a back seat. 3. Turn out...
Seat belts — removal and installation Withdrawal 1. Turn out a bolt of the lower fastening of a forward seat belt and a blade of a flat screw-driver lift up and remove an upholstery of an average rack....
Rear seat shoulder belt Order of execution 1. Remove the rear seat. 2. Remove plugs and turn out bolts of fastening of a back shelf. 3. Turn out an anchor bolt of the bottom fastening of a seat...
Rear seat safety belt Order of execution 1. Turn out bolts of fastening of a pillow of back sitting. Tightening torque: 40–55 Nm. 2. Remove the rear seat lap belt and belt buckle. Tightening...