Rear suspension of cars Hyundai Elantra 2
.
Rear suspension — technical characteristics
Suspension type Lever, with hydraulic shock absorber and anti-roll bar Coil spring Wire diameter x outer diameter x height without load, mm 11.36 x 141.36 x 326.2 Shock...
Suspension type Lever, with hydraulic shock absorber and anti-roll bar Coil spring Wire diameter x outer diameter x height without load, mm 11.36 x 141.36 x 326.2 Shock...
Rear suspension — tightening torque, Nm
Wheel bearing nut 180-220 Rear strut upper mounting nut 20-30 Rear pillar/support element 110-130 Stabilizer bar mounting earring bolt 35-45 Trailing arm/bearing element...
Wheel bearing nut 180-220 Rear strut upper mounting nut 20-30 Rear pillar/support element 110-130 Stabilizer bar mounting earring bolt 35-45 Trailing arm/bearing element...
Rear Suspension — Lubricant
Object Recommended Quantity Wheel bearings, oil seal lip, inner surface of hub and hub cap SAE J310a General Purpose Grease NLGI-2 or equivalent As needed
Object Recommended Quantity Wheel bearings, oil seal lip, inner surface of hub and hub cap SAE J310a General Purpose Grease NLGI-2 or equivalent As needed
Rear suspension — malfunctions
Sign of malfunction Possible cause Method of elimination Abnormal noise The fastening of the parts has become loose Pull up Wheel bearings are damaged or worn out...
Sign of malfunction Possible cause Method of elimination Abnormal noise The fastening of the parts has become loose Pull up Wheel bearings are damaged or worn out...
Adjusting the rear wheel alignment angles
Positive convergence Standard value is 7-13 mm Note: When adjusting, the rear suspension adjusting bolt (T) should be turned an equal amount on both sides. Left wheel...
Positive convergence Standard value is 7-13 mm Note: When adjusting, the rear suspension adjusting bolt (T) should be turned an equal amount on both sides. Left wheel...
Rear suspension — removal and inspection
Removal 1. Remove the upper strut mounting nuts. 2. Raise the vehicle on a lift and install safety supports. 3. Remove the wheels. 4. Remove the brake caliper and hang...
Removal 1. Remove the upper strut mounting nuts. 2. Raise the vehicle on a lift and install safety supports. 3. Remove the wheels. 4. Remove the brake caliper and hang...
Rear strut assembly
Tightening torque: Nm Removal 1. Remove the upper strut mounting nuts. 2. Raise the vehicle on a lift and install safety supports. 3. Remove the wheels. 4. Disconnect...
Tightening torque: Nm Removal 1. Remove the upper strut mounting nuts. 2. Raise the vehicle on a lift and install safety supports. 3. Remove the wheels. 4. Disconnect...
Rear pillar — disassembly and assembly
Tightening torque: Nm Disassembly 1. Before removing the rod nut, compress the coil spring with a special tool. Warning. Do not use pneumatic devices to tighten the...
Tightening torque: Nm Disassembly 1. Before removing the rod nut, compress the coil spring with a special tool. Warning. Do not use pneumatic devices to tighten the...
Suspension arms, trailing arm and knuckle
Suspension arms, trailing arm and knuckle Tightening torque: Nm
Suspension arms, trailing arm and knuckle Tightening torque: Nm
Rear axle hub
Tightening torque: Nm Removal 1. Disconnect the wheel speed sensor (cars with ABS). Warning. When removing the wheel speed sensor from the adapter, be careful not to...
Tightening torque: Nm Removal 1. Disconnect the wheel speed sensor (cars with ABS). Warning. When removing the wheel speed sensor from the adapter, be careful not to...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
We recommend other sections on the topic of Hyundai manuals:
Chassis: Rear suspension Hyundai Accent 3 (2005-2010)
Chassis: Rear suspension Hyundai Sonata 3 (1993-1998)
Link in different formats to this section
TextHTMLBB Code
- User manual
- Control devices
- Audio system
- Starting the engine and driving
- Faults en route
- Maintenance and care
- Technical information
- Power unit
- Gasoline engines
- Diesel engines
- Lubrication system
- Cooling system
- Fuel system (gasoline)
- Fuel system (diesel)
- Decreased toxicity
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts and axles
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Air conditioning system
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Power devices
- Electrical circuits
- General information
- Maintenance
- Power unit
- Engine repair
- Cooling system
- Intake and exhaust system
- Fuel system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts and axles
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Body elements
- Electrical equipment
- Equipment and devices
- Electrical diagrams
- General information
- Introduction to the guide
- Maintenance
- Power unit
- Minor engine repair
- Engine overhaul
- Lubrication system
- Cooling system
- Fuel injection system
- Ignition system
- Exhaust system
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Front suspension
- Rear suspension
- Steering
- Wheels and tires
- Troubleshooting
- Brake system
- Body
- Body elements
- Electrical equipment
- Equipment and devices
- Power devices
- Heating and air conditioning
- Electrical circuits

