Description of the device and steps for repairing the drive shafts and front-wheel drive joints of the Hyundai Accent of the first generation of production from 1994 to 1999.
Technical characteristics of drive shafts Engine 1.3 l Engine 1.5 l Hinge type - External B.J. B.J. - Internal D.O.J. T.J. Length (from hinge to hinge), mm - On the left 380 384 - On the right 675 679 Maximum...
Drive of leading wheels — removal and inspection Removal 1. Raise the car on a lift and remove the wheels. 2. Remove the hub nut. 3. Remove the lower arm ball joint (09568-34000) and the anti-roll bar from the lower...
Hub and steering knuckle — removal and inspection 1. Remove the cap from the hub. 2. Remove the drive shaft nut. 3. Raise the vehicle on a lift and place supports underneath it. 4. Remove the wheels. 5. Remove the brake...
Hub and steering knuckle — bearing replacement 1. Install the special tool as shown in the figure. 2. Remove the hub from the knuckle by rotating the special tool. Warnings: 1) Use only special tool. 2) When...