Clutch device 1. Clutch pedal 2. Master cylinder 3. Supply hose 4. Hydraulic drive pressure tube 5. Working cylinder 6. Screws for fastening the working cylinder 7. Clutch release...
Clutch specifications Specifications of clutch parts Tightening torques for threaded connections
Removing air from the hydraulic clutch actuator 1. Remove valve cap (IN) working cylinder (A) and connect the plastic tube to the valve. Dip the end of the tube into a clear container ½ full of brake fluid. 2. Loosen...
Removal and installation of the clutch assembly 1. Clutch release fork 2. Cover and pressure plate 3. Driven disk 4. Clutch release bearing Withdrawal 1. Remove the MCP 2. Install the centering mandrel in the front...
Removal and installation of the clutch master cylinder 1. Pin for fastening the rod to the clutch pedal 2. Washer 3. Split pin 4. Master cylinder rod 5. Dust coat 6. Retaining ring 7. Thrust washer 8. Piston 9. Spring seat...
Disassembly and assembly of the clutch master cylinder Disassembly 1. Remove the piston retaining ring with pliers. 2. Remove pusher and piston. 3. Remove piston seat with spring. Examination 4. Check up absence of burrs and...
Removal and installation of the clutch pedal Note: the procedure for checking and adjusting the clutch pedal is described in chapter « Maintenance ». 1. Clutch lever; 2. Pedal platform; 3. Pivot pin; 4. Bracket; 5....
Removal and disassembly of the clutch slave cylinder 1. Hollow screw 2. Gasket 3. Fitting 4. Injection tube 5. Valve plate 6. Spring 7. Air vent valve 8. Cylinder body 9. Return spring 10. Piston 11. Case 12. Stem...