Description of the device and repair steps for the five-speed manual transmission M5AF3 of the Hyundai Accent of the first generation of production from 1994 to 1999.
Specifications for mechanical transmission Model - M5AF3 (five-speed) Type Cable driven hydraulically driven gear ratios 1 3.462 - 2 2.053 - 3 1.370 - 4 1.031 - 5 0.838 0.838, 0.878 Reverse 3.250 - main gear...
Changing the oil in the gearbox After inspecting the parts, check for signs of leakage. Remove the filler plug and check the oil level. If contaminated, the oil must be changed. Use SAE 75W/85W halide...
Replacing the input shaft seal 1. Disconnect the drive shaft from the gearbox. 2. Using a flat blade screwdriver, remove the oil seal. 3. Using a special tool (09431-21200), install the input shaft...
Manual transmission control Withdrawal 1. Remove the console assembly. 2. Remove cotter pins and clips (from the gear lever side). 3. Remove the shift lever assembly. 4. Remove the holder and...
Gear shift lever assy Examination 1. Check bushings for wear and damage. 2. Check the return spring for damage or breakage. Assembly 1. Apply multipurpose grease to the sliding surfaces of...
Mechanical gearbox in a block with a bridge Withdrawal 1. Remove the drain plug and drain the gearbox oil. 2. Remove the clutch cylinder. 3. Remove the air filter. 4. Remove select and shift cables. 5. Disconnect...
Disassembly of a manual transmission 1. Remove shift and select cable bracket. 2. Remove the rear cover bolt and the cover itself. 3. Remove the switch of a lantern of a back light, a lining and an arm. 4....
Assembling a manual transmission Assembly is carried out in the reverse order of removal. 1. Install the input shaft oil seal with the special tool (09431-21000). 2. Install the front oil seal with the...
Drive shaft — disassembly, inspection and assembly Disassembly 1. Using a special tool (09432-21201), remove the circlip. 2. Using a special tool (09432-21300), remove the front bearing. 3. Using a special tool...
Output shaft — disassembly, inspection and assembly Disassembly 1. Remove the tapered roller bearing, input shaft fourth gear, spacer ring, output shaft third gear, second gear assembly with second gear bushing and needle...
Differential — disassembly and assembly Disassembly 1. Clamp the differential housing in a vise. 2. Turn away bolts of fastening of a driving cogwheel of differential and remove it from the case of...