Exterior (external elements) of the car Hyundai Accent 3

Body elements. Tightening torques for threaded connections.
Threaded connection/fastener Tightening torque, Nm Screw for fastening the door hinge to the body 33-41 Screw for fixing the door hinge to the door 10-20 Screw for...

Removal and installation the hood
Removal Note: A second mechanic will be required to remove the hood. 1. Disconnect the hoses from the windshield washer nozzles. 2. Unscrew the hinge screws (1) and...

Adjusting the hood position
1. Loosen the hinge screws (1) and, by moving the hood (2), adjust its position so that the gaps on all sides are the same. 2. Adjust the height of the hood by turning...

Replacing the hood sound insulation
Using a suitable tool, remove the pins and sound insulation (A). Note: Be careful not to damage the hood. Location of pistons (15 pcs.)

Removal and installation the hood lock
Removal 1. Remove the battery together with the shelf. 2. Loosen the screws and remove the hood lock (A) together with the radiator panel upwards. 3. Disconnect the hood...

Removal and installation the hood release lever
Removal 1. Remove the front side panel trim. 2. Loosen the screws and remove the hood release lever (1). 3. Disconnect the hood release cable (2) from the lever....

Removal and installation the hood release cable
Removal 1. Remove the following items: hood lock; hood release lever; left wheel fender liner. 2. Remove the retainer (1), disconnect the drive cable (2) from the hood...

Removal and installation the air intake cover
Removal 1. Remove the wiper arms. 2. Remove the hood seal (1). 3. Remove the pins and remove the air intake covers (2). Installation 4. Installation is carried out in...

Removal and installation the trunk lid
Removal Note: A second mechanic will be required to remove the trunk lid. 1. After disconnecting the connectors of the limit switch (1) and license plate light (2),...

Adjusting the position of the trunk lid
1. Loosen the hinge screws (1) and, by moving the trunk lid (2), adjust its position so that the gaps on all sides are the same. 2. Adjust the height of the trunk lid by...

Removal and installation the trunk lid lock
Removal 1. Loosen the trunk lid lock screws. 2. Disconnect the drive rod from the lock. 3. Loosen the screws and remove the trunk lid lock (A). Installation 4....

Removal and installation the trunk lid release lever
Removal 1. Unscrew the self-tapping screw and remove the lever housing (1). 2. Loosen the lever screw (2). Tightening torque: 7-11 Nm. 3. Disconnect the trunk lid lock...

Removal and installation the trunk lid lock cylinder
Removal 1. Disconnect the lock drive rod (1). Unscrew the screws and remove the lock cylinder (2). Installation 2. Installation is performed in the reverse order of...

Removal and installation the filler cap
Removal 1. Loosen the screws and remove the filler cap (A). Installation 2 Installation is carried out in the reverse order of removal.

Removal and installation the lock drive cables
Removal 1. Remove the following items: front and rear seats; front and rear door sill trims; lower trim of the middle pillar of the body; trunk side trim panel; trunk...

Disassembly and assembly of the front door
1. Front door; 2. Waterproof film; 3. Door trim; 4. Switch block; 5. Door opening seal; 6. Door seal; 7. Door hinge; 8. Door glass seal; 9. Door stop; 10. Lock retainer;...

Adjusting the position of the front door
Adjusting the lock 1. Slightly loosen the screws (1) of the lock retainer (2). Tap the retainer with a rubber mallet to adjust its position so that the lock closes...

Disassembling and assembling the rear door
1. Back door; 2. Castle; 3. Waterproof film; 4. Door trim; 5. Armrest; 6. Inner handle body; 7. Inner handle; 8. Lock rod cover; 9. Door stop; 10. External handle; 11....

Removal and installation the front mudguard
Removal 1. Loosen the nuts and screws, remove the clips and remove the front mudguard liner (A). Installation 2. Installation is performed in the reverse order of...

Removal and installation the rear mudguard
Removal 1. Loosen the nuts and screws, remove the clips and remove the rear mudguard liner (A). Installation 2. Installation is performed in the reverse order of removal.

Removal and installation protective molding
Removal Note: Before use, wrap the screwdriver blade with tape and apply tape around the fasteners 1. Using a screwdriver, release the clips and remove the protective...

Removal and installation the roof hatch
1. Guide; 2. Glass panel; 3. Connecting link; 4. Guide; 5. Drainage gutter; 6. Drainage hose; 7. Drainage hose; 8. Bracket; 9. Hatch frame; 10. Deflector rod; 11....

Removal and installation the windshield
1. Molding; 2. Windshield; 3. Fixators Removal 1. Remove the following items: front pillar trim; interior rear view mirror; windshield wiper arms; air intake panel. 2....

Removal and installation the front bumper
1. Decorative grille; 2. Bumper trim; 3. Shock absorber; 4. Bumper reinforcement; 5. Fog light Removal 1. Unscrew the screws, remove the pins and remove the front bumper...

Removal and installation the rear bumper
1. Bumper trim; 2. Shock absorber; 3. Bumper reinforcement; 4. Protective molding Removal 1. Using a screwdriver, remove the pins, unscrew the screws and remove the rear...

Removal and installation the outside mirror
1. Lid; 2. Mirror housing; 3. Mirror glass Removal 1. Remove the pins, remove the trim (1) and disconnect the connector (2). 2. Disconnect the connector (3), unscrew the...

Control dimensions of the body

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Body: Exterior (external elements) Hyundai Elantra 3 (2000-2006)
Body: Exterior (external elements) Hyundai Getz (2002-2011)
Body: Exterior Hyundai Sonata 4 (2001-2012, petrol)
Body: Exterior (external elements) Hyundai Santa Fe 2 (2007-2012, petrol)
Body: Exterior (external elements) Hyundai Tucson 1 (2005-2010)
Body: Exterior (external elements) Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code