Automotive exhaust and intake systems Hyundai Accent 1
Description of repair procedures for the exhaust system, intake system and exhaust gas purification system for Hyundai Accent cars of the first generation from 1994 to 1999.
Specifications and malfunctions Specifications Air filter - With dry filter element Filter Element - Panellett Type Exhaust Piping - Resonance Type Silencer Tightening torques N.m Air filter housing...
Air filter — removal, inspection and installation Withdrawal 1. Remove the piping attached to the air filter. 2. Disconnect the wiring for the intake air temperature sensor. 3. Disconnect the air inlet hose from the air...
Intake manifold and intake pipes Withdrawal 1. Disconnect the idle speed control mechanism. 2. Remove the air hose connected to the throttle body. 3. Remove the accelerator cable. 4. Disconnect the PCV...
Silencers (single shot engine) Main and center silencers Remove the main and then the center muffler assembly with catalytic converter (unleaded gasoline engine) or with front exhaust pipe section...
Exhaust gas cleaning system (single camshaft engine) ECM: Engine control module MAF: Passing Air Mass Sensor MFI: Multi-cylinder injection system MIL: Malfunction indicator lamp (engine check) PCV: Forced crankcase...
EVAP solenoid valve 1. Disconnect the vacuum hose from the EVAP fuel vapor recovery solenoid valve. 2. Disconnect the wiring connector. 3. Connect the vacuum pump to the nipple to which the...
Gas tank cap The fuel tank cap is equipped with a valve to prevent the release of fuel vapors into the atmosphere.