Car clutch repair Hyundai Accent 1
Description of the device and procedures for repairing the clutch of Hyundai Accent cars of the first generation from 1994 to 1999.
Clutch specifications
Clutch - Dry, single-disc with diaphragm spring, hydraulic drive Clutch disc: Friction surface diameter - 200x130 mm (1.5 l engine) (external x internal) - 184x227 mm...
Clutch - Dry, single-disc with diaphragm spring, hydraulic drive Clutch disc: Friction surface diameter - 200x130 mm (1.5 l engine) (external x internal) - 184x227 mm...
Checking and adjusting the clutch pedal
1. Measure the clutch pedal height (from the top surface of the pedal pad to the floor of the passenger compartment) and pedal travel. Default value: (A) 173 mm (B)...
1. Measure the clutch pedal height (from the top surface of the pedal pad to the floor of the passenger compartment) and pedal travel. Default value: (A) 173 mm (B)...
Bleeding the clutch hydraulic drive
In each case, after removing the hydraulic lines or the clutch master cylinder, or if the clutch pedal fails, bleed the clutch hydraulic system. Warning: Use fluid...
In each case, after removing the hydraulic lines or the clutch master cylinder, or if the clutch pedal fails, bleed the clutch hydraulic system. Warning: Use fluid...
Clutch pedal — removal, inspection and installation
Removal 1. Remove the cotter pin, washer and stud. 2. Remove the clutch pedal mounting bolt. Checking and installation 1. Check the clutch pedal shaft and bushing for...
Removal 1. Remove the cotter pin, washer and stud. 2. Remove the clutch pedal mounting bolt. Checking and installation 1. Check the clutch pedal shaft and bushing for...
Clutch drive — removal, inspection and installation
Removal 1. Drain the liquid through the drain hole by unscrewing the plug. 2. Remove the pin, washer and cotter pin. 3. Disconnect the hydraulic drive from the master...
Removal 1. Drain the liquid through the drain hole by unscrewing the plug. 2. Remove the pin, washer and cotter pin. 3. Disconnect the hydraulic drive from the master...
Clutch Master Cylinder — Disassembly, Inspection and Assembly
Disassembly 1. Remove the piston retaining ring. 2. Pull out the rod with the piston assembly. 3. Remove the clamp from the tank, the tank lid and the tank. Note: Do not...
Disassembly 1. Remove the piston retaining ring. 2. Pull out the rod with the piston assembly. 3. Remove the clamp from the tank, the tank lid and the tank. Note: Do not...
Clutch slave cylinder — removal, inspection and installation
Removal 1. Disconnect the hydraulic drive pipe. 2. Remove the slave cylinder mounting bolt. 3. Check for fluid leaks from the working cylinder. 4. Check for damage to...
Removal 1. Disconnect the hydraulic drive pipe. 2. Remove the slave cylinder mounting bolt. 3. Check for fluid leaks from the working cylinder. 4. Check for damage to...
Clutch housing and disc — removal, inspection and installation
Removal 1. Drain the clutch hydraulic fluid and oil from the gearbox housing. 2. Remove the gearbox assembly. 3. Install the special device (09411-11000) into the driven...
Removal 1. Drain the clutch hydraulic fluid and oil from the gearbox housing. 2. Remove the gearbox assembly. 3. Install the special device (09411-11000) into the driven...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
We recommend other sections on the topic of Hyundai manuals:
Transmission: Clutch Hyundai Elantra 3 (2000-2006)
Transmission: Clutch Hyundai Getz (2002-2011)
Transmission: Clutch Hyundai Sonata 3 (1993-1998)
Transmission: Clutch Hyundai Tucson 1 (2005-2010)
Transmission: Clutch Hyundai Matrix (2001-2010, petrol)
Link in different formats to this section
TextHTMLBB Code
- General information
- User manual
- Maintenance
- Power unit
- Engine repair
- Cooling and lubrication system
- Power and exhaust system
- Engine electrical equipment
- Engine management
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Chassis
- Front suspension
- Rear suspension
- Wheels and tires
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Electrical circuits
- User manual
- Control devices
- Starting engine and driving
- Troubleshooting
- Power unit
- SOHC engines
- DOHC engines
- Lubrication system
- Cooling system
- Decreased toxicity
- Fuel system
- Ignition system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Axles and drive shafts
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior (external elements)
- Interior (internal elements)
- Air conditioning system
- Electrical equipment
- Equipment and devices
- Power devices
- General information
- Maintenance
- Power unit
- SOHC engines
- DOHC engines
- Cooling system
- Intake and exhaust systems
- Fuel supply (1.3 l, injection)
- Fuel supply (1.5 l, injection)
- Fuel supply (carburetor)
- Transmission
- Clutch
- Manual gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Body elements
- Electrical equipment
- Equipment and devices
- Electrical circuits