Contents: Removal ⇓ Checking and installation ⇓
Removal
1. Remove the cotter pin, washer and stud.
2. Remove the clutch pedal mounting bolt.
Checking and installation
1. Check the clutch pedal shaft and bushing for wear.
The original source of the article is the website [www.hyundaibook.ru]
2. Check that the pedal is not bent or twisted.
3. Check the return spring for wear and damage.
4. Check the clutch pedal pad for damage and wear.
5. Installation is carried out in the reverse order of removal.
6. Apply general purpose grease to the bushing.
7. Apply general purpose grease to the pin and washer.
8. Connect the rod to the clutch pedal.
9. Adjust the height of the clutch pedal.
10. Adjust the clutch pedal free play.