Clutch disc:
- Friction surface diameter — 200x130 mm (dvig. 1.5 l)
- (external x internal) - 184x227 mm (dvig. 1.3 l)
Working cylinder: Inner diameter, mm - 20.64
Master cylinder: Inner diameter, mm - 15.87
Clutch disc thickness - 8.7+ 03 mm
Clutch pedal height (above the floor) - 173 mm
Clutch pedal free play - 6-13 mm
Clutch pedal travel - 145 mm
Deepening of heads of rivets — 0.3 mm
The gap between the wall and the piston of the working cylinder - 0.15 mm
The gap between the wall and the piston of the main cylinder - 0.15 mm
Tightening torques, Nm
- Clutch pedal to pedal suspension bracket - 19-28
- Pedal suspension bracket - 17-21
- Clutch master cylinder to the wall - 8-12
- The fitting of the hydraulic drive line - 9-14
- Hydraulic line bracket - 13-17
- Tank tape - 4-6
- Clutch slave cylinder - 5-7
- Tightening bolt of the clutch slave cylinder - 20-25
- Clutch cover assembly - 15-22
Lubricants
An object | Lubricant |
Thrust bearing contact surface and thrust fork support | MOLIWHTTE TA No. 2 |
Thrust bearing inner surface | MOLIWHTIE TA No. 2 |
Internal ^ surface of the working cylinder | Brake Fluid DOT 3 |
The outer surface of the piston and the sealing collar The inner surface of the splines of the clutch disc bushing | MOLIWHTIE TA#2 |
The inner surface of the master cylinder and the outer surface of the piston | Brake Fluid DOT 3 |
Clutch Master Cylinder Link, Pin and Washer Clutch Pedal Shaft and Bushings | Lubrication of wheel bearings SAE J310A, NLGIN 2 SAE J310A,
Chassis Lubrication, NLGI No. 1 |
The contact surface of the clutch lever and the thrust of the clutch slave cylinder | MOLIWHTIE TA No. 2 |
Shaft splines | MOLIWHTIE TA #2 |