Maintenance of the ignition system Before servicing the system, turn off the ignition and disconnect the negative battery terminal. The ignition timing is set by the electronic ignition timing control...
Checking the ignition coil 1. Measure the resistance between terminals 3 and 1 (coils located on cylinder side 1 and 2) of the ignition coil, and between terminals 3 and 2 (coils located on...
Checking spark plugs and ignition 1. Disconnect the high-voltage wire from the spark plug. Note: When removing the high-voltage wire, pull on the cap, not on the wire, to avoid damaging the wire. 2....
Starting system malfunctions The starting system contains the battery, starter, traction relay, ignition switch, transmission control switch (only for models with automatic transmissions), and...
Starter device Components: 1. Front cover 2. Front hub 3. Cap 4. Screw 5. Electromagnet 6. Rod 7. Spring 8. Seal 9. Lever 10. Retainer 11. Spring 12. Seal 13. Washer 14. Retaining ring...
Fuse box on the instrument panel Fuse Current strength Chains 1 10A Air conditioning compressor control 2 10A Anti-lock braking system (ABC) 3 10A Hazard warning system 4 15A Stop signal 5 10A Lighting...
Fuses and relays in the engine compartment Description Current strength Protected circuit A (yellow) 60A Generator In (red) 50A Battery D (blue) 20A Radiator Fan Control E (blue) 20A Automatic locking system...