Electrical equipment and appliances Hyundai Matrix
Ignition system — general information The ignition timing is controlled by an electronic control system. The values of the optimal ignition timing for all engine operating modes are recorded in the memory of...
Checking the ignition switch Disconnect the lock connector located under the steering column. Pic. 7.1. Checking the condition of the circuit between the terminals of the connector Check up a...
Checking ignition coils Pic. 7.2. Measuring the resistance of the primary winding of the ignition coil Measure the resistance of the primary winding of the coil between terminals 1 and 2 of...
Checking and cleaning spark plugs Disconnect the high voltage spark plug wires from the spark plugs. Note. When disconnecting the high voltage spark plug wire, pull on the insulating cap, not the wire...
Removal and installation of the ignition coil Remove the ignition fuse (fuse-link F rated 30 A). Remove the cylinder head cover. Disconnect the ignition wires from the coils and disconnect the high voltage spark...
Immobilizer — description and principle of operation System Description The immobilizer system consists of a passive transponder (for mutual recognition), mounted in the car key head, and the antenna unit «Smartra» (Smart...
Anti-theft system programming procedure Key programming Key programming is carried out after the replacement of a faulty engine control unit or when additional keys are issued to the car owner. The procedure...