Vehicle transmission specifications Hyundai Matrix

Table 3.1. Technical characteristics
Name Characteristic Clutch drive type Hydraulic Clutch driven disc Type Outer x inner diameter, mm Dry, diaphragm 215 x 145 Clutch Housing Type With diaphragm pressure...

Table 3.2. Data for testing and adjustment
Name Control values Thickness of the driven disk (in free state) (engines 1.6 l and 1.8 l), mm: 8,5±0,3 Free travel of clutch pedal, mm 6-13 Clutch pedal height above...

Table 3.3. Tightening torques for threaded connections
Component Tightening torque, Nm Pedal to bracket mounting bolt 25-35 Master cylinder to pedal bracket mounting bolt 17-26 Union nut for pipeline fastening 13-17 Pipeline...

Table 3.4. Possible clutch malfunctions, their causes and methods of elimination
Possible clutch malfunctions, their causes and solutions

Table 3.5. Technical characteristics of the manual gearbox
Technical characteristics of the manual transmission

Table 3.6. Possible malfunctions of a manual gearbox, their causes and methods of elimination
Possible malfunctions of a manual gearbox, their causes and methods of elimination

Table 3.7. Technical characteristics of automatic transmissions
Technical characteristics of automatic transmissions

Table 3.8. Nominal value
Name Resistance Torque Converter Lock-Up Clutch Control Solenoid Valve (Damper clutch control solenoid valve) 2.7-3.4 Ohm (at 20°C) Solenoid valve for controlling the...

Table 3.9. Nominal value
Conclusions No Name Resistance 7 and 10 Torque Converter Lock-Up Clutch Control Solenoid Valve (Damper clutch control solenoid valve) 2.7-3.4 Ohm (at 20°C) 6 and 10...

Table 3.10. Checking the pressure in the automatic transmission hydraulic control system
Checking the pressure in the automatic transmission hydraulic control system

Table 3.11. Troubleshooting by pressure values in the automatic transmission hydraulic control system
Troubleshooting by pressure values in the automatic transmission hydraulic control system

Table 3.12. Road tests
Road tests

Table 3.13. Error codes (description)
Error codes (description)

Table 3.14. Troubleshooting by diagnostic codes
Troubleshooting by diagnostic codes

Table 3.15. Gearbox components operating when each gear is engaged
Active ingredient Downshift clutch Reverse gear clutch Overdrive clutch First gear and reverse gear brake Second gear brake Overrunning clutch Position of the automatic...

Table 3.16. For identification of thrust bearings, thrust bearing races and thrust washers
For identification of thrust bearings, thrust bearing races and thrust washers O.D Inner diameter Thickness Symbol in the picture O.D Inner diameter Thickness Symbol in...

Table 3.17. Nominal pressure values in the automatic transmission control hydraulic system
Nominal pressure values in the automatic transmission control hydraulic system

Table 3.18. Preliminary troubleshooting in case of inadequate pressure
Preliminary troubleshooting in case of inadequate pressure

Table 3.19. Technical characteristics of the drive mechanism
Technical characteristics of the drive mechanism Note: M/t – models with manual transmission. A/T – models with automatic transmission.

Table 3.20. Tightening torques for threaded connections
Tightening torques for threaded connections Caution: After removal, replace the self-locking nuts with new ones.

Table 3.21. Troubleshooting Drive Shafts
Troubleshooting Drive Shafts

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Electrical equipment: Specifications Hyundai Santa Fe 2 (2007-2012, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code