Car clutch Hyundai Matrix
General information about the clutch
Fig. 3.1. Clutch mechanism and its drive The clutch mechanism and its drive are shown in Fig. 3.1. Fig. 3.2. Clutch drive components For clutch drive components, see...
Fig. 3.1. Clutch mechanism and its drive The clutch mechanism and its drive are shown in Fig. 3.1. Fig. 3.2. Clutch drive components For clutch drive components, see...
Bleeding the clutch hydraulic drive
The clutch hydraulic drive should be bled every time the connecting pipe, hose and/or clutch hydraulic drive master cylinder is removed, and also when the clutch pedal...
The clutch hydraulic drive should be bled every time the connecting pipe, hose and/or clutch hydraulic drive master cylinder is removed, and also when the clutch pedal...
Removal and installation the clutch master cylinder
Removal Fig. 3.6. Bleed nipple Drain the working fluid through the bleed nipple (Fig. 3.6). Loosen the master cylinder mounting nut. Disconnect the pipes. Fig. 3.7....
Removal Fig. 3.6. Bleed nipple Drain the working fluid through the bleed nipple (Fig. 3.6). Loosen the master cylinder mounting nut. Disconnect the pipes. Fig. 3.7....
Removal and installation the clutch pedal
Removal Fig. 3.11. Removing the cotter pin Remove the cotter pin and washer (Fig. 3.11). Fig. 3.12. Pedal mounting bolts Loosen the pedal mounting bolts (Fig. 3.12)....
Removal Fig. 3.11. Removing the cotter pin Remove the cotter pin and washer (Fig. 3.11). Fig. 3.12. Pedal mounting bolts Loosen the pedal mounting bolts (Fig. 3.12)....
Checking the ignition interlock switch
Fig. 3.16. Checking the integrity of the circuit between the switch terminals Check the integrity of the circuit between the switch terminals (Fig. 3.16). Installation...
Fig. 3.16. Checking the integrity of the circuit between the switch terminals Check the integrity of the circuit between the switch terminals (Fig. 3.16). Installation...
Removal, checking and installation the clutch housing and driven disk
Fig. 3.18. Clutch housing and driven disc Removal Drain the fluid from the clutch hydraulic drive and the oil from the gearbox housing. Remove the gearbox. Fig. 3.19....
Fig. 3.18. Clutch housing and driven disc Removal Drain the fluid from the clutch hydraulic drive and the oil from the gearbox housing. Remove the gearbox. Fig. 3.19....
Disassembly, inspection and assembly of the clutch slave cylinder
Loosen the working cylinder mounting bolt. Checking the technical condition Check the slave cylinder for fluid leaks. Check the slave cylinder boot for damage....
Loosen the working cylinder mounting bolt. Checking the technical condition Check the slave cylinder for fluid leaks. Check the slave cylinder boot for damage....
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
We recommend other sections on the topic of Hyundai manuals:
Transmission: Clutch Hyundai Accent 2 (1999-2005)
Transmission: Clutch Hyundai Elantra 1 (1990-1995, petrol)
Transmission: Clutch Hyundai Getz (2002-2011)
Transmission: Clutch Hyundai Sonata 3 (1993-1998)
Transmission: Clutch Hyundai Tucson 1 (2005-2010)
Link in different formats to this section
TextHTMLBB Code
- User manual
- Control devices
- Salon equipment
- Car driving
- Current service
- Vehicle specifications
- Power unit
- Engine specifications
- Engine maintenance
- Engine repair 1.6 l
- Engine repair 1.8 l
- Cooling and lubrication system
- Power and exhaust system
- Control system
- Transmission
- Transmission specifications
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis
- Suspension and wheels
- Steering
- Brake system
- Body
- Exterior (external elements)
- Passive safety system
- Heater and air conditioner
- Electrical equipment
- Specifications
- Equipment and devices
- Power devices
- Electrical circuits