Car steering Hyundai Matrix

Checking the steering wheel play
Set the front wheels to the straight-ahead position (steering wheel to the center position), start the engine and apply a force of 5 N to the steering wheel rim (turn...

Checking the steering angles of the steering wheels
Fig. 5.2. Stand for measuring the turning radius of the steering wheels Place the front wheels on a turn radius measuring stand and measure the turning angles of the...

Checking the moment of the start of rotation of the ball joints of the steering rod ends
Fig. 5.3. Disconnecting the ball joint of the steering rod end from the steering knuckle Using a special tool, disconnect the ball joint of the steering rod end from the...

Checking the amount of effort required to turn the steering wheel on a stationary vehicle
Place the vehicle on a level, horizontal surface and set the steering wheels in the straight-ahead position. Increase engine speed to 900–1100 min⁻¹. Note: After...

Checking the steering wheel's independent return to the center position
Make sure that the steering wheel returns to the center position on its own and that the force required to turn and return the steering wheel to the center position is...

Checking the tension of the power steering pump drive belt
Fig. 5.7. Point of application of force on the V-belt of the power steering pump drive Press the power steering pump drive V-belt with a force of 98 N at the point shown...

Checking the fluid level in the power steering reservoir
Place the vehicle on a level, horizontal surface. Start the engine. With the vehicle stationary, turn the steering wheel several times in a row until the operating fluid...

Power steering system
Replacement of working fluid Raise the front wheels of the vehicle and place safety stands under the vehicle. Disconnect the return hose from the power steering...

Removal, inspection and installation of the steering column and shaft
Removal Fig. 5.13. Disconnecting the wire from the negative terminal of the battery Disconnect the wire from the negative terminal of the battery (Fig. 5.13). Fig. 5.14....

Removal and installation the steering column lock
Fig. 5.23. Removing the steering column lock bracket If it is necessary to remove the steering column lock assembly, then use a chisel to make a groove in the head of...

Removal and installation the steering cardan shaft
Fig. 5.25. Bolts for fastening the connection of the steering cardan shaft to the steering shaft Loosen the bolt securing the connection between the propeller shaft and...

Removal the steering gear
Fig. 5.27. Steering mechanism Fig. 5.28. Engine air intake hose Remove the engine air intake hose assembly (Fig. 5.28). Disconnect the clamps of the pressure and return...

Disassembly, assembly and installation of the steering mechanism
Fig. 5.35. Steering gear components Checking and adjusting before disassembling Fig. 5.36. Securing the steering gear in a vice Place soft metal pads (brass or aluminum...

Removal and installation power steering hydraulic system hoses
Fig. 5.72. Steering hydraulic system hoses Removal Fig. 5.73. Installation marks on the fitting Align the alignment marks on the fitting, discharge tube and hose...

Removal and installation the return pipe and hose
Removal Remove the power steering fluid reservoir from its bracket. Remove the return pipe and hose fastening clamps. Remove the engine air intake hose assembly....

Checking the power steering
Check for cracks in the hoses by twisting them slightly with your hand. Make sure there are no traces of hose contact with vehicle parts. Filling the power steering...

Removal, disassembly, inspection and assembly of the power steering pump
Fig. 5.76. Power steering pump Removal Disconnect the pressure hose from the power steering pump. Disconnect the inlet hose from the connecting flange on the power...

5.1. Technical characteristics of the power steering
Parameter Technical specifications Steering shaft and joint type Universal joint, steering column with tilt adjustment mechanism and shock absorption device (pop-up...

Table 5.2. Basic data for adjustments and control of the power steering
Component Size Steering wheel play, mm 0-30 Steering wheel angles, deg - Inner wheel 40°1'±2°0 - Outer wheel 33°45' Difference in wheel turning angles when turning left...

Table 5.3. Possible malfunctions, their causes and methods of elimination
Possible malfunctions, their causes and methods of elimination

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Chassis: Steering Hyundai Accent 1 (1994-1999)
Chassis: Steering Hyundai Elantra 1 (1990-1995, petrol)
Chassis: Steering Hyundai Getz (2002-2011)
Chassis: Steering Hyundai Sonata 3 (1993-1998)
Chassis: Steering Hyundai Santa Fe 2 (2007-2012, petrol)
Chassis: Steering Hyundai Tucson 2 (2009-2015)

Add to social network:

Link in different formats to this section

TextHTMLBB Code