Contents: Removal ⇓ Installation ⇓
Removal
Remove the power steering fluid reservoir from its bracket.
Remove the return pipe and hose fastening clamps.
Remove the engine air intake hose assembly.
Disconnect the pressure and return pipes from the steering gear assembly.
Raise the vehicle on a lift and remove the retainer securing the return and pressure pipes.
Lower the vehicle and disconnect the return pipe and hose retainer.
Installation
Installation of parts is carried out in the reverse order of removal.
Note: When installing the injection hose and tube assembly, make sure that they are not kinked or that there is no possibility of them coming into contact with other parts of the vehicle.
After installation is complete, bleed the power steering hydraulic system.