Contents: Removal ⇓ Installation ⇓
Removal
1. Disconnect the brake hose (1) from the brake pipe (2) by unscrewing the nut with a wrench (3).
2. Remove the clamp (4) and disconnect the brake hose (5) from the bracket (6).
3. Unscrew the hollow screw (7), remove the washer (8) and disconnect the brake hose (9) from the caliper.
The material is republished from the web portal: www.hyundaibook.ru
Installation
Caution: When installing, make sure that the brake hose is not twisted.
4. Installation is carried out in the reverse order of removal.