Contents: Removal ⇓ Installation ⇓
Removal
Remove the master cylinder reservoir cap and pump out the fluid from it. Alternatively, open the bleed screw on the slave cylinder and gently press the clutch pedal several times to remove the fluid. Tighten the nipple when all the liquid has drained.
To remove one of the two solid hydraulic lines, first unscrew it from the master or slave cylinder (depending on the tube) union nut, then, having locked the hose with the second wrench, unscrew the second union nut and disconnect the tube from the hose. Remove the tube from the engine compartment.
To remove the hose, first unscrew the hard tube union nuts, then pull out the mounting brackets and disconnect the hose from the mounting bracket. Remove the hose from the engine compartment.
Installation
Installation is carried out in reverse order.