Car engine cooling system Hyundai Accent 2

Technical data of the cooling system
The closed cooling system consists of a water pump, a cross-flow radiator, a radiator fan with an electric cord, a thermostat, a heater core, hoses and sensors. The...

Checking the tightness of the cooling system
Execution order 1. Wait until the radiator cools down to 38°C, remove the radiator cap and connect a cooling system leak tester instead. 2. Create a pressure of 139.3...

Checking the density of the coolant
Execution order 1. Use a hydrometer to measure the specific gravity of the coolant. 2. Measure the coolant temperature and, depending on the temperature, calculate the...

Poly V-belt — removal and installation
Removal 1. Loosen the water pump pulley mounting bolts. 2. Loosen the generator support nuts. 3. Loosen the generator mounting bolt and remove the poly V-belt. 4. Remove...

Cooling system tubes and hoses
SOHC Engine Cooling System Tubes and Hoses 1 – bolt, 10–15 Nm; 2 – bypass hose; 3 – sealing ring; 4 – coolant outlet fitting; 5 – coolant hose; 6 – coolant supply hose...

SOHC Engine Water Pump
1 – bolt, 8–10 Nm; 2 – water pump; 3 – gasket; 4 – bolt, 12–15 Nm. Removal 1. Disconnect the negative battery cable. Drain the coolant into a suitable container and...

DOHC Engine Water Pump
1 – bolt, 8–10 Nm; 2 – generator bracket; 3 – water pump; 4 – gasket; 5 – bolt, 12–15 Nm. Removal 1. Disconnect the negative battery cable. Drain the coolant into a...

Radiator — removal and installation
1 – oil radiator hose for cars with automatic transmission; 2 – lower support; 3 – lower radiator hose; 4 – upper support; 5 – radiator cap; 6 – drain pipe; 7 – Upper...

Radiator cap
1 – excess pressure valve – opens at a pressure of 81.4–108 kPa; 2 – radiator cap; 3 – spring; 4 – vacuum valve spring; the vacuum valve opens at a vacuum of minus 6.86...

SOHC Engine Thermostat
1 – bolt, 15–20 Nm; 2 – coolant outlet fittings; 3 – gasket; 4 – thermostat; 5 – thermostat housing. Removal 1. Drain the coolant to a level below the thermostat. 2....

DOHC Engine Thermostat
1 – bolt, 15–20 Nm; 2 – coolant temperature sensor; 3 – gasket; 4 – thermostat housing; 5 – thermostat; 6 – gasket; 7 – coolant outlet fitting. Removal 1. Drain the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Power unit: Cooling system Hyundai Elantra 3 (2000-2006)
Power unit: Cooling system Hyundai Getz (2002-2011)
Power unit: Cooling system Hyundai Sonata 3 (1993-1998)
Engine 2.0 and 2.4 liters: Cooling system Hyundai Santa Fe 2 (2007-2012, petrol)
Power unit: Engine cooling system Hyundai Tucson 2 (2009-2015)
Power unit: Cooling and lubrication system Hyundai Matrix (2001-2010, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code