1.8 liter engine repair Hyundai Matrix

Adjusting the timing belt tension
Raise the vehicle using a trolley jack. Slowly turn the steering wheel first clockwise, then counterclockwise. Note: There should not be any significant resistance to...

Adjusting the drive belt of attachments
Fig. 2.91. Correct seating of the belt in the pulley grooves Check that the belt is correctly seated in the pulley grooves (Fig. 2.91). Apply a force of 100 N to the...

Removal, inspection and installation of camshafts
Fig. 2.95. Camshafts of a 1.8 L engine The camshafts of the 1.8 L engine are shown in Fig. 2.95. Removal Disconnect the positive crankcase ventilation valve hose and...

Checking and adjusting the valve drive clearance
Checking and adjusting the clearances in the valve drive is performed on a cold engine (with a coolant temperature of 20°C and the cylinder head installed on the engine....

Disassembly, inspection and assembly of the crankshaft
Disassembly Remove the timing belt, oil pump housing, flywheel, cylinder head assembly and oil pan. Refer to the appropriate sections for part removal procedures. Remove...

Removal, inspection and installation of the flywheel (manual transmission) or torque converter drive plate (automatic transmission)
Removal Remove the gearbox and clutch. Remove the flywheel. Fig. 2.124. Flywheel and torque converter drive plate Examination Check the condition of the flywheel contact...

Disassembly and assembly of the connecting rod and piston group
Disassembling the connecting rod cap Caution! Arrange the removed parts (connecting rods, connecting rod caps, connecting rod bearing shells) in the order of their...

Disassembly, inspection and assembly of the cylinder head
Device Fig. 2.140. Cylinder head and valve mechanism The cylinder head is cast from aluminum alloy, has pressed cast iron seats and valve guides. The upper part of the...

Removal, checking and installation the timing belt
Fig. 2.158. Timing belt components Removal Loosen the coolant pump pulley mounting bolts. Loosen the generator mounting bolt. Fig. 2.159. Coolant pump pulley and...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

We recommend other sections on the topic of Hyundai manuals:

Power unit: Engine repair Hyundai Accent 3 (2005-2010)
Power unit: Minor engine repair Hyundai Elantra 1 (1990-1995, petrol)
Power unit: 2.7 liter engines Hyundai Sonata 4 (2001-2012, petrol)
Engine 2.0 and 2.4 liters: Engine repair Hyundai Santa Fe 2 (2007-2012, petrol)

Add to social network:

Link in different formats to this section

TextHTMLBB Code