Replacing the drive shaft seal (Hyundai Accent X3)

1. Disconnect the drive shaft from the gearbox.

2. Using a flat-blade screwdriver, remove the oil seal.

3. Using a special tool (09431-21200), install the drive shaft seal.

3. Using a special tool (09431-21200), install the drive shaft seal.

4. Apply a coat of SAE 75W/85W transmission oil to the seal lip.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Accent 1: Manual gearbox

Gearbox oil change
Malfunctions of mechanical transmission and methods of elimination
Technical characteristics of mechanical transmission

Manual transmission control
Gear shift lever assembly
Mechanical gearbox in a block with a bridge
Disassembling a manual gearbox
Assembly of a manual gearbox

We recommend other articles on the topic of Hyundai manuals:

Replacing the drive shaft oil seal ring Hyundai Elantra 3 (2000-2006)
Replacing the drive shaft oil seal ring Hyundai Getz (2002-2011)
Replacing the drive shaft oil seals Hyundai Sonata 3 (1993-1998)
Table 3.25. Search for causes of drive shaft malfunctions and… Hyundai Santa Fe 2 (2007-2012, petrol)
Replacing hatch elements and servo drive Hyundai Tucson 1 (2005-2010)
Replacing the wheel drive shaft seal Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet