Removal and disassembling the clutch slave cylinder (Hyundai Accent MC)

1. Hollow screw
2. Gasket
3. Fitting
4. Discharge tube
5. Valve plate
6. Spring
7. Air bleed valve
8. Cylinder body
9. Return spring
10. Piston
11. Cover
12. Rod

Removal

1. Disconnect the tube (1) from the working cylinder.

2. Unscrew the two screws (2) and remove the slave cylinder. Tightening torque: 15-22 Nm.

Installation

3. Installation is carried out in reverse order.

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article has been reviewed by: Konstantin Smirnov

Add to social network:

Accent 3: Clutch

Removal and installation the clutch pedal
Disassembly and assembly of the clutch master cylinder
Removal and installation the clutch master cylinder
Removal and installation the clutch assembly
Bleeding air from the hydraulic clutch drive

Possible clutch malfunctions and their causes

We recommend other articles on the topic of Hyundai manuals:

Clutch slave cylinder — removal, installation and repair Hyundai Elantra 1 (1990-1995, petrol)
Clutch slave cylinder Hyundai Getz (2002-2011)
Clutch release slave cylinder Hyundai Sonata 4 (2001-2012, petrol)
Cylinder block Hyundai Santa Fe 2 (2007-2012, petrol)
Clutch slave cylinder — device Hyundai Tucson 1 (2005-2010)
Disassembly, inspection and assembly of the clutch slave cylinder Hyundai Matrix (2001-2010, petrol)

Link in different formats to this article

TextHTMLBB Code

Visitor comments

No comments yet