Troubleshooting the Engine Starting System (Hyundai Getz 1)

Malfunction	Probable causes	Method of elimination
The engine crankshaft does not turn over with the starter	Battery is discharged	Charge or replace the battery
	Poor connection of wires to battery terminals	Securely fasten the wires to the battery terminals
	The lock switch is faulty on cars with automatic transmission	Adjust the position or replace the switch
	The fuse link has blown	Replace the fuse link
	Starter faulty	Repair the starter
	The ignition switch is faulty	Replace the ignition switch
	The starter interlock switch is faulty	Replace the starter interlock switch
The engine crankshaft is turned slowly by the starter	Battery is not charged enough	Charge the battery
	Poor connection of wires to battery terminals	Securely fasten the wires to the battery terminals
	Starter faulty	Repair the starter
The starter continues to operate after the engine has started	Starter faulty	Repair the starter
	The ignition switch is faulty	Repair or replace the ignition switch
The starter motor runs at high speed but does not turn the engine crankshaft	Short circuit in an electrical circuit	Restore the electrical circuit
	Broken gear teeth or faulty starter	Repair the starter
	The teeth of the flywheel ring gear are broken	Replace the flywheel ring gear