Order of execution
1. Install the car on a flat horizontal platform.
2. Warm up the engine to normal operating temperature and turn it off.
Attention! If the car has not been used for a long time, start the engine for 20 minutes.
3. Wait 2-3 minutes for the oil to drain into the sump.
4. Remove the oil dipstick and check the oil level. If the oil level is near the mark «L» on the dipstick, add oil to the mark «F».
Attention! When topping up, use the same type of engine oil that is filled into the engine.
5. Make sure the engine oil is not mixed with coolant or gasoline and has the correct viscosity.