- Do not touch or remove spark plug wires while the engine is running or while the starter is operating.
- Disconnect the ignition wires only when the ignition is off.
- Connect and disconnect the measuring instrument wires only when the ignition is off.
- Do not connect the radio interference suppression capacitor or test lamp to the ignition coil ground terminal.
- Measuring instruments and a stroboscope must not be connected to the positive terminal of the ignition coil while the engine is running.
- Do not replace the ignition coil with a coil of a different type.
- Do not heat the car to a temperature above 80°C (for example, painting, drying a car). Start the engine only when the car has cooled down.
- Wash the car only with the ignition off.
- When performing electric and spot welding, disconnect the battery completely.
The original version is stored on the website [hyundaibook.ru]