Lubricants and working fluids
| Object | Lubricants | Quantity |
| Contact surface of thrust bearing and thrust fork support | MOLIWHITE TA #2 | As required |
| Inner surface of the thrust bearing | MOLIWHITE TA #2 | As required |
| The inner surface of the working cylinder and the outer surface of the piston and the sealing cuff | DOT 3 brake fluid | As required |
| Inner surface of the splines of the clutch disc bushing | MOLIWHITE TA #2 | 0.2 g |
| Inner surface of the master cylinder and outer surface of the piston | DOT 3 brake fluid | As required |
| Clutch Master Cylinder Rod, Pin and Washer | Wheel Bearing Grease SAE J310A, NLGI No. 2 | As required |
| Clutch pedal shaft and bushings | SAE J310A, Chassis Lubricant, NLGI #1 | As required |
| Contact surface of the clutch fork and the clutch slave cylinder rod | MOLIWHITE TA #2 | As required |
| Primary shaft splines | MOLIWHITE TA #2 | As required |
(Information is copied from the website: HYUNDAIBOOK.ru)