Execution order
1. Raise the front of the vehicle and support it on jack stands.
2. Disconnect the return hose from the tank.
3. Connect the additional hose to the return hose and drain the liquid into a suitable container.
4. Disconnect the high-tension wire from the ignition coil. Periodically engage the starter and at the same time turn the steering wheel from lock to lock several times to drain all the fluid from the hydraulic power steering drive.
5. Connect the return hose to the tank and fill the tank with the recommended fluid.
6. Bleed the power steering hydraulic system.
- Power Steering Fluid Type: PSF–3
- Liquid volume: 0.9 l
The basis of the material is information from the website HYUNDAIBOOK.RU