1 – return hose; 2 – tank; 3 – suction hose; 4 – pressure hose.
Removal the return hose
1. Drain the fluid from the power steering hydraulic drive.
2. Disconnect the return hose from the tank.
3. Remove the clamp securing the return hose to the vehicle body.
4. Disconnect the return hose from the steering gear.
Examination
1. Check the hose for damage or deterioration.
2. Make sure there is no tension between the hose and other components.
Installation
Installation is carried out in the reverse order of removal, taking into account the required tightening torques.
