Withdrawal
1. Use a hacksaw to cut grooves in the heads of the sheared bolts. Loosen the bolts with a flat blade screwdriver and remove the steering column lock bracket.
Warning! When installing the steering column lock, new shear bolts must be used.
2. Remove the lock from the steering column.
3. Installation is carried out in the reverse order of removal.
Universal joint
1. Loosen the bolt securing the universal joint to the steering shaft.
2. Remove the universal joint from a steering shaft.
3. Installation is carried out in the reverse order of removal.
Examination
1. Check up a steering shaft on absence of damages and deformations.
2. Check the steering shaft universal joint for play, damage or jamming.
3. Check the ball joint bearing for wear and damage.
Installation
Installation is carried out in the reverse order of removal.