Tightening torques: Nm (kgf cm, lb ft)
Removal and inspection
1. Remove the horn cover assembly.
2. Remove signal plates and horn button connector.
3. Remove the steering wheel locknut.
4. Align the marks on the shaft and the steering wheel and remove the steering wheel using the special tool (09561-11002).
5. Remove the lower damping pad and rheostat connector.
6. Remove the column cover.
7. Disconnect connectors.
8. Remove the multifunction switch.
9. Remove the bolt (connecting universal joint and gear.
10. Remove the bolts securing the column bracket to the body frame, then remove the steering column and shaft assembly.
11. Check the steering column and shaft for damage and deformation, hinges, bracket, operation of the steering column lock mechanism, and dust cover.
Assembly
Assembly is carried out in the reverse order of disassembly.