2. Bleed the air, then start the engine and turn the steering wheel several times to bring the fluid temperature to approximately 50°C.
3. Increase engine speed to 1000 rpm.
4. Close the shut-off valve with a special tool and measure the fluid pressure. Compare the result with the standard value.
- Oil pump pressure (standard value) - 62 MPa
Warning: The shut-off valve must not be kept closed for more than 10 seconds.
5. Disconnect the special tool, connect the pressure hose, tighten it to the required torque.
- Tightening torque: 55-60 Nm
6. Bleed the system to remove air.