Tightening torques: Nm (kgf cm, lb ft)
1. Using a special tool, disconnect the tie rod end from the steering knuckle.
2. Remove the bolt connecting the universal joint assembly to the steering gear housing.
3. Drain the liquid.
4. After removing the connector from the oil pump housing, disconnect the pressure hose, and after removing the clamp, disconnect the return hose.
5. Remove the clamp from the steering gear joint cover.
6. Remove the mounting bolts from the steering gear card.
7. Remove the center element.
8. Remove the stabilizer bar.
9. Remove the steering gear housing towards the side of the vehicle.
Warning: Remove the steering gear housing carefully and slowly to avoid damaging the boots.