Contents: Removal ⇓ Installation ⇓
Typical generator installation elements
A - models without air conditioning;
B - drive models;
1 - generator;
2 - drive belt;
3 - bolt;
4 - generator connectors;
5 - spring;
6 - bar;
7 - tensioner;
8 - roller.
Removal
On vehicles with air conditioning, install a ratchet wrench on the alternator tension bar.
Loosen the generator mounting bolts.
Slowly loosen the alternator belt tension, then remove the belt.
Disconnect the generator electrical connectors.
Loosen the generator tension bar mounting bolt.
Loosen the adjusting bolt nut.
Loosen the bolts and remove the generator tension bar.
Loosen the bolts and remove the roller.
Loosen the bolts and remove the tensioner, remove the generator mounting bolt and remove the generator.
Installation
Installation is carried out in reverse order, taking into account the following:
Place a ratchet wrench on the alternator tension bar and tighten the belt, making sure the drive belt is correctly positioned in the pulley grooves.
Tighten the bar mounting bolts.