2. Remove the oil pan (1). Tightening torque: 10-12Nm.
3. Remove the oil filter (2).
4. Remove the transmission fluid temperature sensor (3).
5. Press the grip and push out the sealing bushing (4) of the wiring harness.
6. Remove the valve assembly (5). Tightening torque of the screws: 10-12 Nm (the screws have different lengths).
[The original can be read on the resource: HyundaiBook.ru]
Note: Be careful not to let the mechanical control valve fall out.
7. Turn the adjusting screw (6) of the pressure regulator to adjust the value of the main pressure. Nominal value: 860-900 kPa.
Turning the adjusting screw clockwise reduces the pressure; counterclockwise - to increase. With each turn of the adjusting screw, the pressure changes by 38 kPa.
8. Install all dismantled elements in reverse order.
Note: When installing, replace the solenoid valve sealing rings (7).
