Contents: Removal ⇓ Installation ⇓
1. Selector cable
2. Selector lever lock cable
3. Selector lever assembly
4. Automatic transmission selector lever
Removal
1. Remove the floor console.
2. Disconnect the selector lever connector (1).
3. Remove the cotter pin (2) and disconnect the cable from the selector lever.
(The original can be found on the resource: www.hyundaibook.ru)
4. Unscrew the nut (3) and disconnect the ignition lock cable.
5. Disconnect the selector lever locking cable (4). Unscrew the nut (5) and remove the cable.
6. Unscrew the screws (6) and remove the selector lever.
Installation
7. Installation is carried out in the reverse order of removal.