Withdrawal
1. Disconnect a wire from the negative plug of joint stock bank.
2. Use a screwdriver to remove the sensor (IN) from the windshield heating deflector (A).
Installation
3. Installation is carried out in the reverse order of removal.
Examination
4. Turn on the ignition.
5. By changing the degree of illumination of the sensor (with a conventional lamp), check the change in the output voltage of the sensor. The voltage should increase as the light intensity of the sensor increases and decrease as it decreases.
1. «Weight»; 2. Nutrition (5 V); 3. Signal; 4. -; 5. Sensor (+); 6. Sensor (-)