Removal
1. Disconnect the wire from the negative terminal of the battery.
2. Remove the right floor console trim (1).
3. Disconnect the sensor connector (2).
4. Turn the sensor (3) counterclockwise by 90° and remove it from the evaporator body.
Installation
5. Installation is carried out in the reverse order of removal.
Examination
6. Start the engine and turn on the air conditioner.
(The original text is located on the portal: hyundaibook.ru)
7. Use an ohmmeter to measure the sensor resistance. If the measured value does not match the nominal value, replace the sensor.
| Evaporator temperature,°C | Sensor resistance, kOhm |
| -2 | 30,16 |
| 0 | 27,82 ±1% |
| 2 | 25,32 |
| 4 | 23,24 |
| 6 | 21,35 |