Contents: Removal ⇓ Installation ⇓
Removal
1. Disconnect the wire from the negative terminal of the battery.
3. Remove the refrigerant from the air conditioner.
3. Remove the radiator.
4. Unscrew the two nuts (1) and disconnect the tubes from the condenser. Tightening torque: 8-12 Nm. Seal the channels and tubes with plugs.
5. Unscrew the two screws and carefully remove the condenser (2).
Installation
Note: Apply compressor oil to the O-rings during installation.
6. Installation is carried out in the reverse order of removal.